Wall Movement · BlastScope

STAB +0,+0

BACKGROUND —

Wall Movement Detection

Load footage that includes the final wall, ramp or bench you need assessed. The tool separates broad-scene motion (camera drift, shimmer) from local anomalies, then grades each zone against a detection limit measured from reference ground you declare stable.

Safety-critical: this is a screening aid for identifying zones that warrant inspection or instrumented monitoring. It is not a slope-stability radar and does not forecast failure.

Speed

00:00.00 / 00:00.00

View

Zones Background-corrected

Opacity

Contrast

Sens

Wipe

——

Zones of concern

ranked worst first

Draw reference zones on ground you are confident is stable — competent rock well away from the blast, or a fixed structure. These establish the detection limit.

Then draw a wall zone for each crest, batter, berm or ramp you need assessed, and press Assess walls.

Zones are ranked by a concern score combining verdict, significance, whether displacement was still accumulating, and the feature type.

All zones

none

Selected zone detail

Select a zone in the table above to see how it was measured: how many nodes were bound to it, how much texture they had to correlate against, how many frames were obscured, and the geometric sensitivity that follows from the camera and face directions.

These are the numbers that decide how much weight the zone's verdict carries.

Wall summary

Background separation

scene-wide motion removed

The broad-area component is camera drift, shimmer and haze. Only what remains after removing it is treated as candidate wall movement.